atmizoo

Atmizoo Tripod Parts And Accessories

Type

3 items left

Spare parts and upgrades for the Tripod

 

Drip Tip Long Top

Tripod Drip Tip Long Top, a longer version of Tripod’s bespoke drip tip top part, closer to classic MTL style drip tips.

Made of POM (Acetal) black.

Tripod’s Drip Tip is a two-parts assembly, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. This top part is the result of a different approach, closer to typical MTL style drip tips, with inner D=3mm / outer D on mouth part 8.2mm / net height 15.0mm.

 

Fixed Air Flow Tubes Kit

 Tripod Fixed Air Flow Tubes Kit targeted for RDL / DL style (air flow hole 2.0mm to 3.0mm range), for those who need a positive tube with fixed air flow within said range. The Kit consists of five positive tubes with air flow hole 2.0 / 2.2 / 2.5 / 2.8 /3.0 mm (tolerance ±0.1mm) which work as a replacement of the stock device positive tube (inner D air flow hole 4.0mm) and offer five more unique air flow tuning options for the Tripod.

Made of 316 Stainless Steel.

 

3.4 Extension Kit

Tripod 3.4ml Extension Kit includes:

-One tank, made of  Borosilicate Glass with fused ends.

-One Chimney extension tube with inner D=3.0mm (SS316F)

-One Chimney extension tube with inner D=4.0mm (SS316F)

The kit increases height of device by only 6mm, to a total of 45.0mm Tripod extended version.

 

3.4 Extension Tubes Kit

Tripod Extension Tubes Kit includes:

-One Chimney extension tube with inner D=3.0mm (SS316F)

-One Chimney extension tube with inner D=4.0mm (SS316F)

 

Stock Short Drip Tip

Tripod Drip Tip, made of POM (Acetal) black.

This Drip Tip is a two-parts assembly, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.

You may either go for

– the stock drip tip Top version, with inner D=4.0mm / net height 8.0mm or

– the Long Top, with inner D=3mm / outer D on mouth part 8.2mm / net height 15.0mm

 

Chamber & Chimney Reducer

 The Tripod Chamber & Chimney Reducer, made of 316 foodgrade stainless steel.

It consists of two parts, that are sandwiching the upper part of the Chimney. The C&C Reduser is pre-installed. This creates a vaporization chamber with lower volume and a chimney with 3.0mm inner D, focusing on flavour oriented setups rather than vapour production.

When removed, the chamber offers approx. 9.0mm coiling height and the chimney gets approx. 5.3mm inner diameter, with proper geometry to get all the clouds you want. The C&C Reducer actually offers you the potential of two different chamber and chimney geometries, thus two different single coil RTAs.

The Chamber Reduser comes with an o-ring 12.5×1.5 Silicone70 clear pre-installed.

 

O-Rings Kit

 All o-rings and custom gaskets of Tripod in one bag.

NBR black, red and clear silicone 70 o-rings type.

Device Main o-rings: all the gaskets and orings as installed on stock device out of the box.

Spare o-rings: all the gaskets and orings as included in the bag of spares out of the box. Same with Device Main o-rings only that the tank gaskets and Seal part oring are semi-transparent instead of black.

 

Top Cap

 Tripod Top Cap, made of 316 foodgrade stainless steel.

Available options:

  • SS-M (316 SS, brushed Matte).
  • SS-IM (316 SS, shot-blasted Ice-Matte).

It comes with a custom gasket Sil70 clear pre-installed.

 

Chimney

 The Tripod Chimney, made of 316 foodgrade stainless steel.

Available in two options:

  • SS-M (316 SS, Brushed Matte)
  • SS-IM (316 SS, Shot-blasted Ice Matte)

It comes with a custom gasket SIL70 Black pre-installed.

 

Positive Post Tube

 Tripod  Positive Post Tube , made of 316 Stainless Steel.

 

Positive Post

 Tripod Positive Post made of 316 Stainless Steel. Post screw included.

 

Deck - Negative Post

Tripod – Deck (Negative Post) , made of 316 Stainless Steel.

It comes with an o-rings NBR black 16×1 and a Tripod Post Screw pre-installed.

 

AFCS Ring

One Tripod air flow control ring, made of 316 foodgrade stainless steel sits around the Tripod base and rotates to adjust air flow via two side slots.

Available options:

  • SS-M (316 SS, brushed Matte).
  • SS-IM (316 SS, shot-blasted Ice-Matte).

 

Base

The Tripod Base , made of 316 foodgrade stainless steel.

It comes with two o-rings NBR black 14×1 pre-installed.

Replacement Tripod bases are not serial numbered, they are engraved as “TR-PARTS” .

 

Pole Insulator

Tripod Pole Insulator made of peek thermoplastic polymer.

 

Pole

Tripod Pole, made of 316 Stainless Steel.

 

Air Flow Pins Kit

Tripod Air Flow Pins Kit includes:

-One Air Flow Pin with Inner D=1.0mm
-One Air Flow Pin with Inner D=1.2mm
-One Air Flow Pin with Inner D=1.5mm
-One Air Flow Pin with Inner D=1.8mm

They reduce Positive Post Tube’s initial D=4mm down to D=1mm, D=1.2mm D=1.5mm and D=1.8mm respectively, offering the ideal air flow for more restricted draw vaping profiles.

An o-ring around their body allows easy installation plus perfect fitting inside the Positive Post Tube. The o-ring is Sil70 2×1 .

On top there is an auxiliary laser engraving “1.0” , “1.2” and “1.5”, “1.8” standing for 1.0mm, 1.2mm, 1.5mm and 1.8mm respectively, to help you distinguish among the three small diameters

Tripod Air Flow Pins are made of 316 Stainless Steel.

The kit is already included with Tripod package.

 

Stock Tank Body

Tripod Tank Body, stock and 3.4 ext kit versions.

Material:

  • Borosilicate Glass with OD=22mm 

 

Extension Tank Body

Tripod Tank Body in Borosilicate glass (Pyrex) clear with outer diameter of 22mm.

Tripod Tank Body, 3.4mL extension tank size version.

For use only with the >> Tripod 3.4 mL Extension Kit <<.

Material: Borosilicate Glass (Pyrex)

Outer Diameter: 22.0 mm

 

Seal

Tripod Seal, made of 316 foodgrade stainless steel.

Available options:

  • SS-M (316 SS, brushed Matte).
  • SS-IM (316 SS, shot-blasted Ice-Matte).

It comes with an o-ring NBR black 18×1 and a custom gasket Sil70 black pre-installed.

 

SS Post Screws

Set of 2 M2.5 x 4mm large pan head philips steel machine screws for Tripod Positive Post and Base, either SS304 or steel core with nickel plating.

Using the steel core, nickel plated screws ensures:

– better wire grip and better screwdriver grip on head, plus

– tear and wear focused on screws (easily replaceable) rather than post threads.

However this also requires:

– regular preview / check for tear and wear on nickel plating plus

– replacement of screws on regular basis

SS304 screws offer peace of mind but a bit worse results on grip.

 

Steel Core Ni Plated Post Screws